The purpose and correct operation of the glass edging machine

Precautions for the correct operation of the glass edging machine

1. For the newly purchased edging machine, be sure to read the instruction manual before using it. After understanding the transmission principle of the machine, the functions of various handles, handwheels, electrical buttons, waterway and airway regulating valves, and mastering the knowledge of machine maintenance, you can operate the machine.

2. The quality of the grinding head of the edging machine has a very important effect on the grinding quality of the glass. The position of the grinding head and the moving gap have been adjusted before leaving the factory. Generally, do not use the rest except the forward and backward grinding heads. Random changes, so as not to affect the quality of grinding. In addition, the retreat position of the grinding head is not easy to be too large, otherwise the waterproof cover will be easily damaged, causing water leakage and burning the motor.

3. Whether the cold temperature is sufficient also has a great influence on the grinding effect. Always check whether the cold pipe is blocked or not. Especially the pipeline of the straight line edging machine is easy to be blocked by the bristles, and it is not easy to be noticed after blocking, which will cause the coldness and insufficient influence on the edging quality.

4. The non-comparative transmission used by the edging machine must be in the open state when adjusting the speed, otherwise it is easy to damage the continuously variable transmission of the edging machine.

The glass edging machine is one of the main glass edging machines. We must check before use, so that many problems can be avoided.

1. When water leakage, electricity leakage or oil leakage is found, stop the machine for inspection and take measures, pay attention to the working conditions of various instruments and meters, and whether there is any abnormal sound in each part.

2. We have to clean the equipment regularly to clean out the sundries that are not related to production. I suggest once a day.

3. We also need to regularly apply grease to the chains, gears and screw rods, I suggest once a month.

4. We also need to replace the circulating water regularly to prevent the glass powder from clogging the water pump and the water pipe. We replace it every 15 days.